I can’t stand this anymore and I’m wondering if someone has anything that could help.

I play with controllers a lot these days, and I am noticing that with my PC, the range and stability of the BT connection is just absolute fucking garbage. I can be sitting literally only 2 feet from the adapter, and it will still often spaz out and delay my inputs or hold them too long. Like I am turning right, let go of the stick and it continues to turn right for another full second after I am not longer giving any input, or it just doesn’t register I’m giving any input when I am pressing keys or moving the stick.

I know it ain’t the controller or the distance, and doubtful of it being interference because my PS5 is right next to my PC and I don’t even have my controller disconnect going into the furthest room in the apartment away from the console, but when I am connected to the computer, damn thing can disconnect when I set the controller down on top of the desktop.

The adapter I use was recommended to me by over 100 different users on the PC Gaming subreddit Reddit long before the exodus, and it’s supposed to have a 30ft range.

My only other idea is that it’s Windows itself. I’ve dealt with similar bullshit back in XP with the wifi polling. It would poll the availability of connections every 30 seconds, which resulted in huge lag spikes every 30 seconds. Used to use a utility to just kill the process in Windows and never again got those horrible lag spikes everyone always associated with wifi. Is this what’s going on with the BT? Is there a way to fix this crap?

  • From personal experience (and a few different albeit cheaper BT adapters), you would actually be better off purchasing a mobo that has the wireless technology built into it. Once I made that jump, I’ve gotten better results. Apologies as this is probably not the response you’d want to hear.

  • HidingCat
    link
    fedilink
    21 year ago

    Gotta list your hardware man, while it may not solve the issue, at least we can try and see if it is your hardware combination that’s causing it.

  • @CondorWonder@lemmy.ca
    link
    fedilink
    21 year ago

    Also - how is the adapter plugged in? USB 3 causes interference with Bluetooth so it’s a good idea to put the adapter on an extension and keep it away from the pc and other devices.

    • 🇰 🌀 🇱 🇦 🇳 🇦 🇰 ℹ️OP
      link
      fedilink
      English
      2
      edit-2
      1 year ago

      I’ve heard this as well as getting interference being used in the back panel in general, so I have it plugged in the front panel, in a USB 2.0 slot.

      I have been contemplating getting a male to female USB extension so I can maybe put the adapter further from the machine itself as well as orient it better.

      • YuzuDrink
        link
        fedilink
        11 year ago

        I can vouch for the extension being useful for getting the receiver away from other USB 3 ports and cables, which as others have said is almost certainly what’s disrupting your BT signal.

        I’ve dealt with the same kind of problem, and using an extension really helped, as long as I put the receiver away from USB 3 devices and cables.

  • @Dagnet@lemmy.world
    link
    fedilink
    21 year ago

    Sounds stupid but will work: if your Bluetooth adapter is using a USB 3.0 Port, swap it to a 2.0 port

  • smallaubergine
    link
    fedilink
    1
    edit-2
    1 year ago

    Maybe you got a bad adapter? if you have another computer or a friend who is willing to let you test it out on their computer that might help isolate the issue. I dislike bluetooth in general and have had bad experiences with it so i try and stay away from relying on BT

  • KimJammer
    link
    fedilink
    11 year ago

    Not sure on what you have, but it sounds like you might have forgotten to screw in the antenna? I made this mistake too and it made my Bluetooth range go from garbage to amazing. Did one come with your adapter?