I have setup so many instances over the months on different servers and the web ui always takes 40s to a minute to load per page I have always used redis for caching and the best methods even the aio docker image(s) are really slow.

kind of just been living with it for the past month or so but its really annoying when others are saying theirs takes seconds to load.

edit: totally didn’t forget to include a body

  • ShittyKopper [they/them]
    link
    fedilink
    English
    41 year ago

    Because it’s ✨ modern ✨ and ✨ enterprise ✨

    Most new software not explicitly made for and by hobbyists will assume “just throw more hardware at it” to be a valid solution to inefficiency, and unfortunately Nextcloud (especially with any of the office extensions) seems to be heading that way.

    • @[email protected]OP
      link
      fedilink
      English
      11 year ago

      yeah it sucks but its strange that i have done that yet its still slow and barely uses any resources when being slow

  • @[email protected]
    link
    fedilink
    English
    41 year ago

    I’ve experienced the same, even the hosted/paid instances Nextcloud recommends are very slow.

    I think it’s just not built to be fast.

    • @[email protected]
      link
      fedilink
      English
      11 year ago

      On my server it’s way much faster than WordPress (ok, being faster than the most bloated CMS is not that hard…)

    • @[email protected]
      link
      fedilink
      English
      01 year ago

      Same here,it tried running it on a vps, i tried it as the only program running on a 32GB ram operton server, now i’m running it inside Docker with Redis and all the recommended optimizations, no apps installed . As slow as always.

      Nextcloud is like Windows 98, when you install it it’s fast, then as you add data to it it gets expotentially slower.

      I’m moving most data to Syncthing, gave up on the Files part of Nextcloud.

      • @[email protected]
        link
        fedilink
        English
        11 year ago

        Syncthing is what I use as well, it’s very fast and I’ve been using it for over a year now with no issues.

        I’ve actually had nextcloud nuke my data once before too, they had a bug that reset the created/mod time of every file to something like 01/01/1000 and completely broke everything, I had to restore from a backup.

    • @[email protected]OP
      link
      fedilink
      English
      21 year ago

      ah lucky i did sort of solve my problem using the nextcloud docker image for a community and it’s fast that is stripped down on all the apps though so probably going to give the docker container a go on my server

    • Human Crayon
      link
      fedilink
      English
      1
      edit-2
      1 year ago

      I am with you as well. I’ve had my instance up for 3 years on 4 cores and 8GB ram and each page loads in seconds. I’m not running anything crazy on it either (stock + 3ish extras). Hard drives are 4x sas in raid10.

  • @[email protected]
    link
    fedilink
    English
    21 year ago

    I’m using their apache docker and i don’t see many speed issues.

    I see issues instead with WordPress, my blog with 15000 pages but just 1000 visits a month takes 30 seconds to load a single page… Could not manage to improve it, even with extensive caching, percona, redis, and so on…

    One day I need to find the strength to migrate to Hugo (the automated tool makes a mess)

    • @[email protected]OP
      link
      fedilink
      English
      11 year ago

      oh yeah i have a small community and setup an archive with the apache nextcloud docker container but then forgot about it then yesterday i was trying to install an alternative and noticed it so took a look at the nc container and it was so fast its crazy how the vm i made with 1vcpu and 1GB ram outperformed a vm running on way more powerful server with nextcloud.

      oof yes wordpress its so slow I had tried everything and it would be so cool too, I see these wordpress site builders and websites running wordpress god knows how they are so fast but a +1 for hugo i use it for my blog which only has 2 blog posts with about 1 view that isn’t a bot/scraper

  • MaggiWuerze
    link
    fedilink
    English
    21 year ago

    What Hardware are you using? My nextcloud takes at most a couple seconds and has only been getting faster these last few updates.

  • @WanderA
    link
    fedilink
    English
    21 year ago

    I’m not running nextcloud myself, but have you checked that the database settings are scaled to match your server’s resources?

    • @[email protected]OP
      link
      fedilink
      English
      21 year ago

      yeah i use mariadb with it and messed with the config but still nothing more than maybe 1 second same with enabling caching with redis and editing the php config i did get it down from 3-4 minutes though so thats something

      • @WanderA
        link
        fedilink
        English
        11 year ago

        What CPU / RAM / DISK resources do you have allocated?

        • @[email protected]OP
          link
          fedilink
          English
          11 year ago

          4 cores 8GB ram and 500GB i looked at a resource monitor and the cpu barely hits 10% when im trying to load ages and the server is running other things

          • @WanderA
            link
            fedilink
            English
            11 year ago

            Next thing that comes to mind is web server settings / threads / workers. But I’m afraid I can’t help you more since I’m not familiar with Nextcloud.

            • @[email protected]OP
              link
              fedilink
              English
              21 year ago

              yeah i have increased them to the recommended settings and tried adding some but still cant get it to constantly load under a minute. i would put it down to the server being 100s of miles from me but even my server running in house is slow

  • poVoq
    link
    fedilink
    English
    21 year ago

    Uhm, you will need to tell us more about your hardware or setup.

    I wouldn’t describe my Nextcloud as especially fast or optimized, but it is only around 20s from the login screen to being able to use it. And once you are logged in it is quite fast.

    • @[email protected]
      link
      fedilink
      English
      21 year ago

      I had that same issue until I disabled the collabora extension. It’s much, much better now.

    • @[email protected]OP
      link
      fedilink
      English
      21 year ago

      i have used all sort of hardware from a pi 4 to a vm on dell server with 2 vcpus and 8GB ram and now a vm on a custom server with 4 vcpus of a AMD Ryzen 9 5900X and 8GB ram using the docker aio I havent messed with it yet because i expected it to work

      • poVoq
        link
        fedilink
        English
        11 year ago

        You are using normal database like Postgres and it runs on a SSD?

        • @[email protected]OP
          link
          fedilink
          English
          11 year ago

          using mariadb for my bare metal one that runs on a hdd but no clue what the docker one uses and that is on a SSD

          • poVoq
            link
            fedilink
            English
            21 year ago

            The best is to run the database on an SSD, but move the data directory to a HDD for more storage.

  • @[email protected]
    link
    fedilink
    English
    21 year ago

    What kind of hardware are you using?

    Nextcloud does need some tuning by default, specifically the php, nginx/apache, and database settings so that they all make use of more resources and some stuff like cache headers or opcode caching.

    If you haven’t used it yet, I think the AIO installation of nextcloud includes a lot of config optimization by default. I don’t have experience with it, but probably worth a try?

    I’m pretty sure the database tuning is what made the biggest difference to me.

    • @[email protected]OP
      link
      fedilink
      English
      11 year ago

      yeah i tried the aio install and it was still slow a bit faster than my bare metal install but it was comparing a ryzen 9 to a xeon iirc

  • @[email protected]
    link
    fedilink
    English
    11 year ago

    Even on my obscure setup (NetBSD nvmm virtual machine running on NetBSD host using zfs) I get decent performance with PostgreSQL, and minimal PHP opcache and redis tuning. One thing is not to use too many php-fpm processes. I host a small private server for family and friends, and usually limit the number of processes to 8. The VM has 8 GB of RAM and 10 CPU cores, but the cores are slow by today’s standards.

    Very long delays on otherwise decent hardware (i. e. anything newer than 10 years) always smell of DNS problems, if the symptom is a very long wait time with nothing happening, and then a reasonably fast page rendering / UI loading.

    I’m quite happy with the performance, although some of the regular tasks seem to consume excessive amounts of “system” CPU time. But response time and preview rendering are all acceptable.

    • @[email protected]OP
      link
      fedilink
      English
      11 year ago

      ah ill have to take a look at what i have set the php-fpm processes too might have set it to something stupidly high not knowing because high = better right? haha

  • RandomLegend [He/Him]
    link
    fedilink
    English
    11 year ago

    Take a look into the logs, anything suspicious there? Maybe some timeouts, read/write errors, unresponsive tasks?

    What does your webserver say about resource usage for nextcloud? If you load it up, does it stay super low like not even giving it enough resource?

    • @[email protected]OP
      link
      fedilink
      English
      1
      edit-2
      1 year ago

      cpu is low 0.2% but ram seems fine using 2GB and looking at the logs in the web ui the only one i have really gotten is

      [PHP] Error: Doctrine\DBAL\Exception\DriverException: An exception occurred while executing a query: SQLSTATE[HY000]: General error: 7 FATAL:  terminating connection due to administrator command
      server closed the connection unexpectedly
      	This probably means the server terminated abnormally
      	before or while processing the request. at /var/www/html/3rdparty/doctrine/dbal/src/Driver/API/PostgreSQL/ExceptionConverter.php#91
      
      PUT /ocs/v2.php/apps/user_status/api/v1/heartbeat?format=json
      from 192.168.200.200 by admin at 2023-06-24T15:08:05+00:00
      
  • @[email protected]
    link
    fedilink
    English
    1
    edit-2
    1 year ago

    What database? I use Mariadb as a backend and have never had slowness like you describe. I guess also how many files?

    • @[email protected]OP
      link
      fedilink
      English
      11 year ago

      same not too sure about the docker version i just setup and with my bare metal install not that much nothing over 500 and the docker one is a fresh install

  • operator
    link
    fedilink
    11 year ago

    While 40-60s is definately not normal, Next loud is heavily bloated with a bunch of plugins and features many people don’t need. Go through the plugins page and see what you really need.

    • @[email protected]OP
      link
      fedilink
      11 year ago

      ha this is exactly what i did on the instance i setup for a community yesterday and its really fast so im probably going to clone that setup on my server just with the apps and thigns i use

  • @[email protected]
    link
    fedilink
    English
    01 year ago

    If you only want online file storage and sync, you may want to try Seafile. It’s a lot faster and has been rock solid since 10+ years for me. Not viable if you need some of the many nextcloud exentions though

    • @[email protected]OP
      link
      fedilink
      English
      11 year ago

      ah i hear about Seafile a lot yeah its a shame i use the nextcloud things and im use to their ui its handy for quickly sharing things

    • VindianaJones
      link
      fedilink
      11 year ago

      I have the same issues with Nextcloud as OP, regardless of the hardware it’s running on or what kind of optimizations I’ve done, but I’ve always hesitated to use Seafile because it doesn’t keep the files in tact. They are chunked/encrypted or something else, which I’m sure helps performance, but I really value having my files just be regular files with Nextcloud, so if I ever want to take them out of Nextcloud without the help of the application, I can just do that.

      I wish Seafile had an option to maintain the file integrity. If it did, I would definitely give it another try.