• @[email protected]
    link
    fedilink
    238 months ago

    Would just be confusing. Temperatures above a few hundred degrees have no place in most people’s daily lives, so that would be mostly for scientific notations, and scientists use Kelvin anyway for precision.

    • @[email protected]
      link
      fedilink
      English
      108 months ago

      The use of kelvin over Celsius has nothing to do with precision. They’re the same thing, with different offsets.

      • @[email protected]
        link
        fedilink
        18 months ago

        Technically yes and no. Kevin is absolute temperature, since the offset is zero it measures the total temperature. Celsius is relative, since the offset places its zero at a conventionally useful place it measures deviation from that baseline. That’s why you have temperatures always in K and never °K, but always in °C and never just C. But yes, the sizes of the units are the same.

        • @[email protected]
          link
          fedilink
          English
          08 months ago

          Kelvin and Celsius can both be used interchangeably and you can always get the same answer every time using either; they are equally as precise. So is fehrenheit for that matter, although the conversion would get even more complicated.

          It’s just usually using the one with zero offset makes the math easier, which is why it tends to be the one used for scientific calculations.

          • @[email protected]
            link
            fedilink
            18 months ago

            When the measurement being used is ∆T, change in temperature, this is correct. Occasionally, like in the ideal gas law equation, the measurement is T, or absolute temperature, which requires zero offset. In these cases, Celsius will give the wrong answer.

            • @[email protected]
              link
              fedilink
              English
              18 months ago

              As I said

              It’s just usually using the one with zero offset makes the math easier

              You can use Celsius in the ideal gas law. You just have to make sure to include the offset in your calculation. There is no loss of precision by using Celsius, and it isn’t wrong. It’s just the math is easier if you use kelvin, because as you point out (in this case) it’s the ratio of the absolute T that’s important, and a delta T is not enough.

                • @[email protected]
                  link
                  fedilink
                  English
                  18 months ago

                  Yes, as I said repeatedly, the math is easier which is the reason. If you didn’t include the offset in the calculations, you wouldn’t lose precision, you’d just be wrong.

                  I’m at a loss as to what you don’t understand.

                  • @[email protected]
                    link
                    fedilink
                    18 months ago

                    I suspect you may have mistaken me for the first poster in this comment chain. I never disagreed with your statement that precision is not a factor, I was clarifying only that they are not totally interchangeable. Interchangeable in relative measure yes, easy to convert in absolute measure yes, equally precise yes, but they are different things, albeit extremely similar.